|
Model:HE06-100SEH/01
100W/K Mixed Liquid Heat Exchanger
1. Description
The HE06−100SEH/01 Mixed Liquid Heat Exchanger is a full automation temperature control product. It uses intelligent controller to control the whole system of the heat exchanger. According to the variation of environment temperature, the intelligent controller can automatically detect, operate and record the whole system’s operating time, power consumption, event and historical data. It can store 100 event records and 1280 historical data records, and can enquire 256 days’ daily record information. The product is widely applied in telecom cabinet, small and medium sized telecom room, UPS room, outdoor base station room, etc. The heat exchanger includes the following specs: 800W,1000W,1300W, 1500W, 1900W. In addition, it also can be custom made.
2. Features
(1) Strong adaptability
(2) High intelligence
(3) High precision
(4) High reliability
(5) The heat exchange capacity can be custom made
(6) Low noise
(7) Low energy consumption
(8) With 4 way switching value detection
(9) With 1 way room air conditioner control
(10) Input voltage range: DC36 - 65V
(11) With dry contact alarm output
(12) Dust proof and water proof
3. System Principle Diagram
4. Standard Compliance
5. Technical Parameters
Diagram 2: Dimension of 1000W Heat Exchanger
6. Electrical Wiring Diagram
Diagram 3: Wiring Diagram
Wiring Ports:
0V -48V: power supply input (voltage input: DC36 - 65V)
12V GND: heat exchanger voltage output
S: smoke sensor detection input
D: door alarm detection input
W: water sensor detection input
* : not connected pin
TX RX SGND: RS - 232 communication interface
ALARM: general alarm output
F+ F- : auxiliary straight ventilation control output (output voltage: DC48V)
7. System Control
Technical Parameter
a.LCD display, user friendly;
b.Simultaneously display temperature and humidity inside the cabinet and communication room;
c.Temperature measurement accuracy: 0.1 °C; humidity measurement accuracy:4%;
d.Can store 180 days’ daily event record, 1 record every day; Daily highest temperature, lowest temperature, average temperature; Daily event record;
e.Store the former day’s daily data at 0: 00 every day; Can enquire 180 days’ daily record information;
f.RS485 or RS232 communication, RTU-Modbus protocol, support remote detection and control;
g.Power supply: DC36V - 65V;
h.Power consumption:≤5W;
i.Working environment: -30°C~70°C; <90%RH;
j.Installation method: guide rail,hanging;
k.Dimension:190mm×190mm×45mm
8. Wiring Diagram
J1: display board
JD1: DC48V input, 1 - 0V, 2 - -48V;
JD2: heating output, 1 - +, 2 - -;
JD3: fan power supply input, 1 - DC+/AC-N, 2 - DC-/AC-L;
JD4: 1~4 - internal circulation fan 1; 5~8 - external circulation fan 1;
JD5: 1~4 - internal circulation fan 2; 5~8 - external circulation fan 2;
JD6: 1~4 - internal circulation fan 3; 5~8 - external circulation fan 3;
1 - Red(48V), 2 - White (feedback input), 3 - Yellow(control output),
4 - Blue(0V);
JD7: 1, 2 - direct ventilation output ;
3, 4 - general alarm output (dry contact output, disconnecting alarm);
5 - water pump power supply + (Red); 6 - water pump power supply -(Black);
7 - water pump PWM(Blue);6 - water pump state feedback (Yellow);
JD8: RS232 interface, 1 - RXD, 2 - TXD, 3 - SGND;
JD9: 4 way DI input::
1. 12V power output
2. DI1, smoke sensor, active
3. DI2, open door state, active
4. DI3, water sensor, active
5. DI4, active
6. 0V
